AnaCom, Inc. - Products - EKu-Band VSAT Transceiver Series

KU band
AnaCom's series of SEKU Band VSAT transceivers are available in transmitter output levels of 0 dBm, 2, 4, 8, 16, 20, 25, 40, 50, 60, 80, 100 and 125 Watts, in single or redundant configurations. Higher powers are available with external HPAs. These transceivers are ruggedly built for continuous outdoor duty in all types of environments. They are especially suitable for SCPC, MCPC, and DAMA applications.

Features

Easy to install.

No indoor equipment required.

Built in test facilities for improved maintainability and reduced dependence on external equipment.

Compliant with INTELSAT and Eutelsat specifications.

Frequency agile radio equipment. Completely independent TX and RX frequency selection.

Superior phase noise, IESS 308 /309.

Auto ranging power supply.

One LNC covers the entire RX Band.

CE certified.

Flexible Applications

Rural Telecommunications Expansion

Industrial Networking

LAN and WAN extensions

Emergency link restoration

Remote Surveillance

Broadcast

Data distribution and collection

Point-of-Sales Systems

Video teleconferencing

Conventional Voice Traffic

Compact, Functional Design
AnaCom's SEKU Band VSAT transceivers integrate all necessary functions into a small, highly integrated out-door package which provides excellent reliability in a wide range of environments and functions.
AnaCom, Inc.

SEKu-BAND VSAT TRANSCEIVER SERIES
0 dBm, 2, 4, 8, 16, 20, 25, 40, 50, 60, 80, 100 and 125 Watts

The up converter, down converter, power amplifier, monitor and control and power supply are included in a single enclosure. The only cabling required to the indoor equipment are IF cables. The LNC connects to the transceiver with a single coaxial cable.

An ovenized, high stability crystal oscillator is used to lock the TX and RX synthesizers. The onboard microprocessor is used to give additional temperature and aging compensation.

BITE Facility
To improve and simplify maintenance routines, an external terminal (or computer) can be connected to monitor a number of critical parameters without use of additional test equipment. These include:

Transmitter power output

Power supply voltages

TX and RX local oscillator stresses

Internal temperature

Alarm details

Controllable functions from the terminal include:

TX frequency

RX frequency (independent from TX)

TX gain (including OFF / ON)

RX gain

RF gain

Comprehensive Monitor & Control
A powerful Monitor and Control feature allows you to monitor and control the transceiver on the same M&C bus with most indoor equipment such as modems and multiplexers. The Monitor & Control system can be used in combination with the unit's internal metering function to monitor operational parameters.

MS DOS and Windows^®-based Supervisor M & C software is provided for use in combination with a PC for monitoring and controlling all major earth station equipment besides the transceiver.

Benefits

A family of products with significant commonality minimizes demands for spares and training.

"Last Touch" controls allow for remote configuration or local (manual) configuration.

Flash memory means that the transceiver always powers up with exactly the same operating conditions as when it lost power (or was turned off).

Comprehensive maintenance features for operational effectiveness and minimum outages.

Simple installation.

Manufactured using state-of-the-art technology.